The 714-52 is a very high performance proximity Reader for reading the unique ID-Code of all MIFARE® Chips. The 714-52 Reader is the best choice for system integrators because of its wide range of power inputs (between 5V to 13.6V DC) and the large choice of integrated output formats.

Attributes

• Multiple output formats
• Spacer plate for easy mounting, also on metal surfaces
• Compatible with all MIFARE® Chips
• Reads common NFC Tags
• Big interface choice
• Variable operating voltage of 5 -13.6 Volt DC
• Compact Dimensions

The 728-52 Proximity Card Reader is specially designed for the operation in a PC environment. It is suitable for reading all FSK 26/37bit, HID ProxII® compatible passive transponders. Their internal code can be used directly in the applicable software application without any need for software modification, since it is entered at the curser position. Like this typing errors can be avoided and the card number does not need to be printed on the outside anymore. The 728-52 has got a keyboard emulation and can be plugged in directly into a USB Port without installation of any hardware drivers. It acts as a Human Interface Device. No external power supply required.

Attributes

• Reads UID Code
• Contactless reading of all HID ProxII® 26/37bit compatible passive transponders
• USB-Interface transmitting either the Hex- or the Decimal-Codes in user selectable length, also Wiegand and Crosspoint Code selectable
• Control of reading process by buzzer tone
• Easy connection by Standard USB-Port Plugs

In cooperation with the Belgian specialist for petrochemical and oil industry PRONOR we offer an ATEX Multi-RFID reader according to ATEX II 2 G/Ex db IIC T6 Gb and ATEX II 2 D/Ex tb IIIC T85°C IP66 standard.

Can be used in tank farm areas and other ATEX classified zones.
Reading techniques such as MIFARE®- and NFC UID, MIFARE® R/W, EM4200/Atmel 5577 and HID Prox® 26-37bit are available.

Of course, as with all our ID readers, the multi-output formats are also selectable here.
The compact design also allows an easy installation.

Attributes

• Reading distance up to 15 cm depending on reading technique
• 3 LEDs and 1 Buzzer can be steered externally
• Continous or single output mode
• Up to 14 Output Formats supported depending on reading technique
• Variable operating voltage of 5 -13.6VDC
• Compact Dimensions

Compact dimensions and extraordinary reading distance make the 783-52 Reader ideal for numerous OEM applications. It is particularly suitable for the integration into access control systems. The integrated Spacer Plate allows for easy mounting on walls and even directly onto metal surfaces. The 783-52 reads the factory-set ID-Code from the Transponder and transmits it via RS-485 bus. 3 LEDs and a beeper can be controlled by network host.

Attributes

• Reading distance upto 5cm
• Reader cover can be customized with your own logo
• RS485 Output Format supported
• 3 LEDs, 1 Buzzer 2 OCT can be controlled externally
• Integrated Spacer Plate for easy mounting, even on metal surfaces
• Fully potted for increased weather resistance
• Variable operating voltage of 5 -13.6V DC
• Compact Dimensions

The USB Multi-tag Desktop reader is a dual frequency RFID proximity reader operating simultaneously on both 13.56MHz and 125kHz. It can read the unique ID or tag number from a variety of cards and tags, and connects to a PC via USB. The device enumerates as a CDC (Communication Device Class) and appears as a virtual COM port. It outputs the transponder code to a PC running terminal emulation software.

A 10-way DIP switch on the back of the unit is used to select the required output format. A green LED and a beeper are used to indicate a successful read and a red LED indicates an error condition.

Plug & Play:
No driver or configuration software required.